HotRodCarbs.com
HotRodCarbs.com

Carburetor Heat Insulating Spacers and Bowl Shields

"The carburetor insulating spacers and shields that we got from Hot Rod Carbs work great! Since putting them on, we haven't had anymore carburetor fuel percolation, vapor lock, or hard starting problems." "Thank You so much for giving us this peace of mind when driving our car!" Robert H. 

 

Protect Your Investment!

hot rod carburetor spacerOur Carburetor Heat Insulating Spacers and Bowl Shields are made of an Aero-Space Engineered Material that minimizes the Engine to Carburetor thermal transfer “Heat Soak” and the associated Negative Effects caused by the lower boiling point temperatures of today's gasoline blends... and believe us, it is not just the ethanols in most fuels today that are causing these problems.


Each of our Carb Spacers & Bowl Shields have been designed to be used Individually or in stacked "Paired Units" for even greater insulating properties. *While our 1/4" insulators works great, If your hood clearance will allow, we do recommend that each carburetor use a 1/2" Thick "Paired Unit". It's the same principle as using more insulation in your home's attic, Not Less. **click on this photo for a larger image of 1/2" Paired Units installed

 

• Each of Our Carburetor Spacers &/or Shields - Includes Carb Mounting Studs, Nuts, Washers & Gaskets

 

 

  • Proprietary Patented Composite
  • Material Will Not Melt - Crush or Deform
  • Black O.E.M. Appearance
  • True Thermal Break Between Engine Heat and Carburetors 
  • Hard Rigid Material that is "Tough As Nails"

 

 

• Each of Our Carburetor Spacers &/or Shields - Includes Carb Mounting Studs, Nuts, Washers & Gaskets

 

** BUYERS BEWARE! ALUMINUM IS NOT AN INSULATOR, AND POLY-CORE SIGNBOARD IS NOT STABLE >>>> CLICK HERE **

 

 

Sort by

Napa Carburetor Studs Rockford Dorman ST-12 ST-20 ST-22

Napa Carburetor Studs Rockford Dorman ST-12 ST-20 ST-22

$1.49

READ ALL - 151 STUDS TOTAL - QUALITY - NAPA - ROCKFORD DORMAN - CARBURETOR TO INTAKE STUDS - ZINC PLATED - All are 5/16"-18" x 5/16"-24" (coarse - fine) - All are New, in the BRIGHT ZINC PLATING, not the newer…

Specialty Products Company 9127 Carburetor Stud Kit

Specialty Products Company 9127 Carburetor Stud Kit

$1.25

READ ALL - 80 STUDS, NUTS, WASHERS TOTAL - SPECIALTY PRODUCTS COMPANY # 9127 CARBURETOR STUD KIT - 1.175" Exposed Thread - All are 5/16"-18" x 5/16"-24" (coarse - fine) - All are New, in the BRIGHT ZINC P…

Specialty Products Company 9129 Carburetor Stud Kit

Specialty Products Company 9129 Carburetor Stud Kit

$1.50

READ ALL - 80 STUDS, NUTS, WASHERS TOTAL - SPECIALTY PRODUCTS COMPANY # 9129 CARBURETOR STUD KIT - 2.150" Exposed Thread - All are 5/16"-18" x 5/16"-24" (coarse - fine) - All are New, in the BRIGHT ZINC P…

Large Base Rochester 2-Jet - Carb Spacer - 1/4” Thick - Heat Insulating

Large Base Rochester 2-Jet - Carb Spacer - 1/4” Thick - Heat Insulating

$34.95

LARGE BASE PLATE - ROCHESTER 2-JET - 2G - 2GC - 2GV Carb Insulating Spacer - 3" Diameter Airn Horn  (see avail. thicknesses & costs below) • Fits ALL Large Base - Primary & Secondary Carburetor Base Pl…

Large Base Rochester 2-Jet - Paired Unit - 1/2” Thick - Heat Insulating

Large Base Rochester 2-Jet - Paired Unit - 1/2” Thick - Heat Insulating

$74.95

LARGE BASE PLATE - ROCHESTER 2-JET - 2G - 2GC - 2GV Carb - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit - 3" Diameter Air Horn - If you have the hood clearance, we recommend using …

Vintage-94 - 3-Bolt - Paired Unit - 1/2” Thick - Heat Insulating

Vintage-94 - 3-Bolt - Paired Unit - 1/2” Thick - Heat Insulating

$49.95

$AVE - VINTAGE 94 - 3-BOLT CARBURETORS - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = 1/2" Paired Unit  • Holley / Ford 94 - 2110 • Edelbrock 94 • Stromb…

Stromberg BIG 97 - 3-Bolt - Carb Spacer - 1/2” Thick - Heat Insulating

Stromberg BIG 97 - 3-Bolt - Carb Spacer - 1/2” Thick - Heat Insulating

$39.95

STROMBERG BIG 97 - 3-BOLT CARBS - Carb Insulating Spacer (see available thickness & costs below) • Holley 2110 • Stromberg BIG 97 • Speedway 9 Super 7 • Demon 98 • each…

Stromberg BIG 97 - 3-Bolt - Paired Unit - 1/2” Thick - Heat Insulating

Stromberg BIG 97 - 3-Bolt - Paired Unit - 1/2” Thick - Heat Insulating

$49.95

STROMBERG BIG 97 3-BOLT CARBURETORS - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = 1/2" Paired Unit  If you have the hood clearance, we recommend using these! • S…

Holley 2300 - Carb Spacer - 1/2” Thick - Heat Insulating

Holley 2300 - Carb Spacer - 1/2” Thick - Heat Insulating

$64.95

HOLLEY 2300 Insulating Carb Spacers - All Holley 2300 Spacers Now Have The Ears That Cover The Vac On The Corvette Intakes - Like this 1st - Main Image ( The Non-Eared Versions are available Special Order - In Large Quantities On…

Holley 2300 - Paired Unit - 1/2” Thick - Heat Insulating

Holley 2300 - Paired Unit - 1/2” Thick - Heat Insulating

$74.95

$AVE - HOLLEY 2300 - 1/2" THICK CARBURETOR INSULATORS - 1 spacer with 1 shield = Paired Unit  - All Holley 2300 Spacers Now Have The Ears That Cover The Vac On The Corvette Intakes - Like this 1st - Main Ima…

Sort by

 

Facebook Google Plus Trustwave

eCommerce Software by CubeCart